LabelStation Pro 240
Page 51 of 67
3.3.1 Print Config.
This feature is used to print out all the current configuration settings onto a label, including a test
pattern to obviate any defective dot/pixels in the print-head (failed heater elements). Please refer to
section 4.2.
3.3.2 Dump Mode
Captures data from the communications port (data received by the printer) and prints it out. In dump
mode, all information is printed in two columns, the left column being characters received from your
system and the right column being their corresponding hexadecimal values. This allows users and
engineers to verify data and debug the program. Please refer to section 4.2.
Notes:
1. Dump mode requires 4” (100mm) wide paper width.
2. To resume normal printing, turn the printer off briefly.
3. Press the FEED button to return to the previous menu.
3.3.3 Rotate Cutter
This feature can be used to rotate the cutter blade forward or reverse to assist in the removal of
jammed label.
Diagnostics 1/4
>
Print Config.
Dump Mode
Rotate Cutter
Self Test …
Printing …
1/1
Diagnostics 2/4
Print
Config.
>
Dump Mode
Rotate
Cutter
Printing …
1/1
Dump Mode
Diagnostics 3/4
Print
Config.
Dump
Mode
>
Rotate Cutter
UP: Fwd.
DOWN: Rev.
MENU: Exit
