LabelStation Pro 240
Page 40 of 67
Gap Size
0024 dot
2. Press the
DOWN
key
to move the cursor from left digit to
right digit, and press the
UP
key
to set the value from “0” to “9”
and the “dot/ mm/ inch”. Press the
SELECT
key to set the gap
size.
Gap Mode
Pre Printed
3. The printer feeds labels to calibrate the sensor sensitivity
automatically. When calibration is complete, the LCD screen will
return to the previous menu.
B. Bline Mode
Press the
UP
key and
DOWN
key to scroll the cursor to the sensor type. Press the
SELECT
key to enter the black-mark sensor calibration mode.
B-1 Automatic
On selecting the Automatic option you see the following message, and the printer
feeds out label while calibrating the sensitivity of the black mark sensor. When
calibration is completed, the LCD screen returns to the previous menu.
B-2 Manual
In cases where Automatic calibration of the BLine sensor cannot be used, the Manual function may
be used instead.
Calibration 2/4
Gap
Mode
>
BLine Mode
Cont.
Mode
Gap Mode
1/4
>
Automatic
Manual
Pre Printed
BLine Mode
Automatic
BLine Mode
2/4
>
Automatic
Manual
Pre Printed
