LabelStation Pro 240
Page 37 of 67
3.1.2.19 Calibration
This option is used to calibrate the sensitivity of the various optical media sensors in the printer.
Optical sensors allow the printer to track the passing of individual labels, and also detect the
absence/presence of ribbon, and these sensors occasionally need recalibrating when a new roll of
label or ribbon is fitted.
A. Gap Mode
Press the
UP
key
and
DOWN
key to scroll the cursor to the media type and press the
SELECT
key to enter the calibration mode. Press
MENU
key to cancel the setting and return to the previous
menu.
Note: These settings, made at the printer, will be over-written by commands from the labelling
software (label template) at print time unless the “Use current printer settings” option is used
in the labelling software.
CALIBRATION
GAP MODE
CONT> MODE
BLINE
EXIT
AUTOMATIC
AUTOMATIC
AUTOMATIC
MANUAL
MANUAL
MANUAL
PRE-PRINTED
EXIT
PRE-PRINTED
EXIT
EXIT
Calibration 1/4
>
Gap Mode
BLine
Mode
Cont. Mode
Gap Mode
1/4
>
Automatic
Manual
Pre Printed
