LabelStation Pro 240
Page 41 of 67
Entering the Manual option displays the following message, with steps which must be completed:
Mode
Actions
Paper Len.
00151 dot
1. Press the
DOWN
key
to move the cursor from left digit
to right digit, and press the
UP
key
to set the value from
“0” to “9” and the “dot/ mm/ inch”. Press the
SELECT
key
to
set the paper length.
BLine Size
0024 dot
2. Press the
DOWN
key
to move the cursor from left digit
to right digit, and press the
UP
key
to set the value from
“0” to “9” and the “dot/ mm/ inch”. Press the button to set the
bline size into the printer.
The width of the line in dots can be calculated as follows:
200 dpi printer:
Width of line in mm x 7.87
300 dpi printer:
Width of line in mm x 11.81
BLine Mode
Scan Mark
Intensity
X
Ref. Level
XXX
3. Open the print-head mechanism, manipulate the label to
position the black mark centrally under the label sensor, then
close the print-head mechanism. Press the
SELECT
key to
scan the label and capture the value.
Label Sensor
Black Line under sensor
BLine Mode
Scan Paper
Intensity
X
Ref. Level
XXX
4. Open the print-head mechanism, manipulate the label to
position a blank area (no black mark) under the label sensor,
then close the print-head mechanism. Press the
SELECT
key to scan the label and capture the value.
