13
1. Press the [custom] button till the tamp disable appears on the menu screen.
2. Position product detector #1 at an appropriate position relative to the retracted side tamps.
3 Product Detector #1 can be downstream of the retracted side tamp if the label is applied further
towards the trailing end of the product.
3.Position Product Detector #2 at an appropriate position relative to the fully extended swing
tamp, and downstream from Product Detector # 1.
FRONT APPLICATOR
Product Detector #1 must be positioned far enough upstream to at least allow the swing tamp
time to reach the fully extended position slightly before the product arrives at the apply position.
See Figure 3.
1. Press the [custom] button till the tamp disable appears on the menu screen.
2. Position product detector #1 at an appropriate position relative to the extended swing tamps.
Figure
3
Product
Detector
#1,
Front
Application