Product Service 1-800-522-7658
13
13
C
HAPTER
5
U
SING
Y
OUR
E
NCLOSURE
Planning
Thoroughly understand procedures and equipment required before
beginning work.
Arrange for minimal disruptions, such as room traffic or entry into the
room while the enclosure is in use.
Start-up
Clean and surface disinfect the inside of the enclosure. Use UV light as
required for protocol.
Turn on the fluorescent light.
Only raise the sash for loading.
Wear a long sleeved lab coat and rubber gloves. Use protective eyewear.
Wear a protective mask if appropriate. Consult your Safety Officer for
additional personal protective equipment recommendations.
Work Techniques
Keep all materials inside and perform all operations inside the work area.
Unloading Materials and Equipment
All open trays, weigh vessels and containers should be covered before
being removed from the enclosure.
Shutdown
Turn off the fluorescent light and install the UV sash closure panel.
Clean and surface disinfect the interior surfaces after completion.
Turn on the UV light to decontaminate the work area as determined by
your protocol.
