Chapter 4: Features and Safety Precautions
Product Service 1-800-522-7658
12
12
120, 240 minutes and infinitely ON. It is easily changed by selecting the
time necessary on the control panel.
8.
UV Sash Closure
Panel
provides added safety to prevent access and air
currents inside the non-ventilated enclosure when the UV light is activated.
The panel must be in place for the UV light to operate.
9.
Switched Outlet
is
located inside the non-ventilated enclosure for
powering electrical equipment.
10.
Accessory Work Surface
is dished to contain spills and is contoured to fit
the dimensions of the non-ventilated enclosures.
Safety Precautions
1.
Use good housekeeping in the enclosure at all times. Clean up spills
immediately. Periodically clean all interior surfaces.
2.
Do not work with hazardous volatile chemicals in this enclosure.
3.
All acid use in this enclosure is prohibited.
4.
Radioisotope materials are prohibited in this enclosure.
5.
The use of safety goggles, protective clothing, gloves and any other
personal protective equipment recommended by your safety officer should
be used.
6.
The sash should remain in the down position while using the enclosure.
7.
Ensure the enclosure is connected to an electrical service in accordance
with local and national electrical codes
.
Failure to do so may create a fire
or electrical hazard. Do not remove or service any electrical components
without first disconnecting from electrical service.
8.
Ensure only trained operators use the non-ventilated enclosure. All users
should review the User’s Manual and become familiar with the operation.
9.
Avoid direct exposure to ultraviolet (UV) radiation; NEVER work in the
non-ventilated enclosure with the UV light on. Always use the UV sash
closure panel in the closed position when using the UV light to provide
added protection.
