Labconco Protector XStream 9840400, User Manual

Page: 15 / 62

10
Product Service 1-800-522-7658
Chapter 3: Getting Started
Unpacking Your Laboratory Fume
Hood
Carefully remove the shrink-wrap or carton on your fume hood and
inspect it for damage that may have occurred in transit. If your
unit is damaged, notify the delivery carrier immediately and retain
the entire shipment intact for inspection by the carrier.
DO NOT RETURN GOODS WITHOUT THE
PRIOR AUTHORIZATION OF LABCONCO.
UNAUTHORIZED RETURNS WILL NOT BE
ACCEPTED.
IF YOUR HOOD WAS DAMAGED IN TRANSIT,
YOU MUST FILE A CLAIM DIRECTLY WITH
THE FREIGHT CARRIER. LABCONCO
CORPORATION AND ITS DEALERS ARE NOT
RESPONSIBLE FOR SHIPPING DAMAGES.
Do not discard the shipping skid or packing material for your fume
hood until you have checked all of the components and installed
and tested the unit.
Do not remove the fume hood from its shipping skid until it is
ready to be placed into its final location. Move the unit by placing
a flat, low dolly under the shipping skid, or by using a floor jack.
Do not move the hood by tilting it onto a hand
truck.
Removing the Shipping Skid
LEAVE THE FUME HOOD ATTACHED TO ITS
SHIPPING SKID UNTIL IT IS AS CLOSE TO ITS
FINAL LOCATION AS POSSIBLE. MOVE THE
HOOD BY USING A SUITABLE FLOOR JACK,
OR BY PLACING A FURNITURE DOLLY
UNDERDNEATH THE SKID. DO NOT MOVE
THE HOOD BY TILTING IT ONTO A HAND
TRUCK.
The United States
Interstate Commerce
Commission rules
require that claims be
filed with the delivery
carrier within fifteen (15)
days of delivery.
!
☞
☞
☞