Laars NTV, Installation And Operation Instructions Manual

Page: 8 / 92

Page 4
LAARS Heating Systems
Figure 5. Location of Components, Size 600
EXHAUST VENT CONNECTION
GAS CONNECTION
PRESSURE RELIEF VALVE
TOUCHSCREEN
HEAT EXCHANGER
MANUAL SHUTOFF
GAS VALVE
VENTURI
AIR/ GAS BLOWER
AIR PRESSURE SWITCH
WATER INLET
WATER OUTLET
AIR INLET CONNECTION
DRAIN VALVE
CONDENSATE TRAP
GAS VALVE
MANUAL SHUTOFF
GAS VALVE
ON / OFF SWITCH
1.4 Warranty
LAARS Heating Systems NeoTherm appliances are covered
by a limited warranty. The owner should complete the
warranty registration at
www.Laars.com .
All warranty claims must be made at www.Laars.com . or to an
authorized LAARS Heating Systems representative. Claims
must include the serial number and model (this information
can be found on the rating plate), installation date, and
name of the installer. Shipping costs are not included in the
warranty coverage.
Some accessory items may be shipped in separate packages.
Verify receipt of all packages listed on the packing slip.
Inspect everything for damage immediately upon delivery,
and advise the carrier of any shortages or damage. Any such
claims should be filed with the carrier.
The carrier, not the
shipper, is responsible for shortages and damage to the
shipment whether visible or concealed.
1.5 Unpacking
The NeoTherm unit is shipped in a single crate with the
following standard components packed with the appliance.
(See Figure 7)
A. Exhaust vent terminal (US only)
B. Air intake terminal
C. Temperature/pressure gauge kit
D. Circulator pump/wire harness (units with pump)
E. CPVC exhaust pipe section (199-850) (US only)
F. Outdoor/system sensor kit
G. Flow switch kit (399-850)
H. Alternate size vent/terminal screens
J. Exhaust vent adapter CPVC/ST ST (750-850)
K. 4x6 PVC adapter with 4x7 PVC pipe section
(750-850) (not to be used on exhaust in Canada)
1. Remove all packing and tie-down materials.
2. Check the contents of the carton against the items
shown.