Page 35
N
EO
T
HERM
Boilers and Water Heaters
Figure 32. NeoTherm with Touch Screen
Touch Screen
Section 8
Navigating the Touch Screen
8.1 The Touch Screen
The Touch Screen is located front and center on the
NeoTherm and allows you to navigate into all of the
functionality and control that is available to setup and
customize your heating and/or hotwater system.
8.2 Using the Touch Screen
A screen saver is programmed into the display. Simply
touch the screen to wake it up.
While under normal operation, the Touch Screen will
automatically present this Home screen. See Menu 1
Menu 1. Home Screen
Menu 2. Status Summary
The home screen shows a picture of the NeoTherm
controller. The color of the controller depends on the
status of the NeoTherm, as shown below.
Color Status Control
Icon
Blue
Normal operation
Red
Lockout
Gray
Standby mode (Burner
switch off)
Gray and
crossed
out
Communication
problem
Yellow
Hold state. This could
be Anti short cycle, fan
speed transitions, etc.
Figure 33. Boiler Status Colors
To check the operation of the appliance, press the large
Control Icon on the Home screen. The system will
present a Status Summary screen for the appliance:
Summary of Contents for NTV
