Laars NTH, Installation And Operation Instructions Manual, Page: 16 / 96

Page 12
LAARS Heating Systems
1.6 Warranty
LAARS Heating Systems NeoTherm appliances are covered
by a limited warranty. The owner should complete the
warranty registration at
www.Laars.com .
All warranty claims must be made at www.Laars.com . or to an
authorized LAARS Heating Systems representative. Claims
must include the serial number and model (this information
can be found on the rating plate), installation date, and
name of the installer. Shipping costs are not included in the
warranty coverage.
Some accessory items may be shipped in separate packages.
Verify receipt of all packages listed on the packing slip.
Inspect everything for damage immediately upon delivery,
and advise the carrier of any shortages or damage. Any such
claims should be filed with the carrier.
The carrier, not the
shipper, is responsible for shortages and damage to the
shipment whether visible or concealed.
1.7 Unpacking
The NeoTherm unit is shipped in a single crate with the
following standard components packed with the appliance.
(See Figure 12)
A. Exhaust vent terminal (US only)
B. Air intake terminal
C. Temperature/pressure gauge kit
D. Circulator pump/wire harness (units with pump)
E. CPVC exhaust pipe section (199-850) (US only)
F. Outdoor/system sensor kit
G. Flow switch kit (399-850)
H. Alternate size vent/terminal screens
J. Exhaust vent adapter CPVC/ST ST (750-850)
K. 4x6 PVC adapter (Not Shown) with 4x7 PVC
pipe section (750-850) (not to be used on exhaust
in Canada)
L. Vent Pipe Extender (Outdoor Models Only)
1. Remove all packing and tie-down materials.
2. Check the contents of the carton against the items
shown.
L
Figure 12. Contents of Shipping Package