EN
69
Display
Operating Procedure
Description
“Technical” Programming
Menu 93.2°C
Autofill Delay
2s start
2s stop
5
The first value indicates the time in seconds between the detection of the need to fill and the start of filling.
The second value indicates the time in seconds between filling and its actual end. Press the Encoder Knob to
access the menu, rotate the Encoder Knob to set the desired automatic filling time, press the Encoder Knob
to confirm the desired value.
Menu 93.2°C
Fill During Brew
YES
6
Press the Encoder Knob to access the menu, rotate the Encoder Knob to choose between
YES and NO, press the
Encoder Knob to confirm the option.
Menu 93.2°C
Autofill Timeout
10
7
Press the Encoder Knob to access the menu, rotate the Encoder Knob to
set the desired time, press the
Encoder Knob to confirm the option
.
Menu 93.2°C
Fill With Pump
WITH PUMP
8
Press the Encoder Knob to access the menu, rotate the Encoder Knob to choose between
WITH PUMP and WITHOUT
PUMP
, press the Encoder Knob to confirm the option.
Menu 93.2°C
Cup Warmer
Settings
• The electronics installed in this espresso
machine give priority to the brew boiler
for pressure. The activation of the auto-
fill cycle during the brewing process can
reduce the overall dispensing pressure
in the brew boiler.
• During the auto-fill cycle, if a brew cycle
is chosen, the auto-fill cycle is delayed
until all brew cycles are complete. •
SAFETY TEST allows to bring the steam
boiler temperature to 140°C, thus
triggering the safety valve. Once the
valve has triggered disable the function.
• Should the safety valve fail to trigger
within approximately one minute of the
temperature reaching 140°C, disable
the function and replace the valve.
• Only qualified technicians can perform
this operation.
Steam Boiler
Menu 93.2°C
Coffee Boiler
Settings
Menu 93.2°C
Steam Boiler
Settings
Summary of Contents for LEVA X
Page 97: ...EN 97...
Page 98: ......
