EN
44
Display
Operating Procedure
Description
Accessing Programming Mode
• To change the values of any parameter
the operator must first enter into the
programming mode.
• There are two levels within the
programming mode that allow the
programming of specific parameters.
• The two programming levels are as
follows:
• Barista Programming
- The parameters
contained within this level are ones the
operator can change to affect the quality
of the espresso.
No password is required for access.
•
Technical Programming - The parameters
contained within this level are ones
the operator can change to affect the
performance of the espresso machine.
These parameters are set in the factory
and their adjustment requires the
intervention of a service technician La
Programming Mode
Brewing 93.2°C
0 -0.1
SECONDS BAR
Brewing 93.2°C
0 -0.1
SECONDS BAR
1
While the espresso machine is on, rotate the Encoder Knob until the following display appears.
Leva 93.2°C
Click to Go Home
2
Press the Encoder Knob until the following display appears.
Home 93.2°C
Manual Brewing
Power Options
Machine Settings
3
Press the Encoder Knob to access the “Barista” programming menu.
Press and hold the Encoder Knob. After about 5 seconds the “Technician” programming display will appear.
(see point 5)
Menu 93.2°C
Language
ENGLISH
4
This is the “Barista” programming level. To set the coffee boilers, to enable/disable the resistance of the cup
warmer if present, and etc..
Summary of Contents for LEVA X
Page 97: ...EN 97...
Page 98: ......
