background image

Weather Data (LCD Section 2) 
Indoor temperature and humidity are displayed simultaneously in this 
section. Use the DISPLAY key to toggle through the displays for other 
weather information: 
- Outdoor temperature/humidity 
- Outdoor wind chill 
- Outdoor dew point 
- Rainfall 24h 
- Rainfall 1h 
- Rainfall total. 

 

Notes to Dewpoint and Windchill: 
Air can at a certain temperature only carry a certain amount of water 
(water vapor), which also increases and decreases with temperature. 
If the air temperature decreases below the so called dewpoint (satura-
tion point), the excessive water vapor will condense and fall out in 
form of dew, fog or rain. At a temperature of e.g. 15° C and a relative 
humidity of 50% the dewpoint will be about 5° C, at 80% humidity 
about 12° C. At a relative humidity of 100% saturation is reached, i.e. 
the dewpoint is 15° C. At a dewpoint below freezing the fallout will 
become frost or snow. 
 
Windchill has been introduced for battle planning during World War II. 
It represents not the real measured but the one temperature a person 
feels in open area under the influence of wind and cold. Windchill is 
laid out in tables for various temperatures and wind speeds. At an 
outdoor temperature of e.g. 8° C and calm winds a person moving at a 
speed of 6 m/s will already feel a windchill temperature of 0° C. 
 
Wind Data (LCD Section 3) 
The current wind direction will be displayed on the LCD compass on 
the wind section. Press the WIND key to toggle between wind direc-
tion as numerical (e.g. 225° ) and abbreviated characters (e.g. SW) as 
well as numerical wind speed display inside the compass circle. 
  
 
 
 
 
 
 

12.  Operation keys 
 
The base station has 8 keys for easy operation. Please refer to the 
following table for use and function of each key: Further descriptions 
of the key functions with regard to their immediate range of applica-
tion can be found in the Programming modes: 

 

SET - key 

- In normal mode to enter the manual basic 

programming mode 

- In basic programming mode to select the 

following setting modes: 

- LCD contrast setting 
- Manual time setting (hours/minutes) 
- 12/24 time format display 
- Calendar setting (year/month/date) 
- Time zone setting 
- ° C/° F temperature setting 
- Wind speed unit setting 
- Rainfall unit setting 
- Pressure unit setting 
- Relative air pressure setting 
- Weather picture threshold setting 
- Storm warning setting 
- Acoustic storm alarm setting 
- In setting modes confirmation of the se-

lected values 

- In alarm modes alarm ON/OFF 
- In alarm mode to enter programming of 

alarm values (long pressing) 

- To exit MIN/MAX modes 

PRESSURE - key  - Toggle between Absolute and Relative air 

pressure displays 

DISPLAY - key 

- Toggle between the following current/ 

maximum/ minimum display modes: 

- Indoor temperature and humidity 
- Outdoor temperature and humidity 
- Outdoor wind chill 
- Outdoor dew point 
- Rainfall (24h, 1h, total) 

WIND - key 

To toggle between the following settings: 
- Wind speed 
- Wind direction 
- Wind direction display in degrees  

Summary of Contents for WS2307





















Reviews: