74
Note:
It is important to keep all the connected extension heads away from
rain, moisture and other extreme weather conditions as exposure can
cause short circuits and damage to this item.
18.
Changing batteries:
Battery change only in the thermo-hygro-sensor:
1. Open the battery cover
2. Remove the old batteries and insert with new ones of the recom-
mended type and replace the cover
Once the sensor is powered up, press and hold the PLUS(+) key for
approx. 2 seconds in the normal display mode, the base station will
sound a short beep and synchronize to the sensor otherwise no weather
data will be received.
Battery change only in the base station:
1. Connect power adaptor to base station and power outlet.
2. Open the battery cover located at the back of the base station.
3. Remove the old batteries, insert with new ones of the recom-
mended type and replace the cover
This method of battery replacement will result in no loss of MIN/MAX
and history data. However in case of possible power failure, the base
station will lose the MIX/MAX and all weather data recordings and will
need to be synchronized to the sensors again by pressing the PLUS(+)
key for 2 seconds.
Note:
When batteries require replacement for the base station, the low battery
indicator will light up on the LCD.
Please participate in the preservation of the environ-
ment by properly disposing of all used-up batteries and
accumulators at designated disposal points. Never dis-
pose of batteries in a fire as this may cause explosion,
risk of fire or leakage of dangerous chemicals and
fumes
