56
Mounting the thermo-hygro Sensor
An ideal mounting place for the thermo-hygro sensor would be the outer
wall beneath the extension of a roof, as this will protect the sensor from
direct sunlight and other extreme weather conditions.
To wall mount, use the 2 screws to affix the wall bracket to the desired
wall, plug in the thermo-hygro sensor to the bracket and secure both
parts by the use of the supplied screw and ensure that the cables from
the wind and rain sensors are correctly plugged in otherwise data
transmission errors could occur.
10.
Resetting & factory settings:
As previously mentioned, in the event of a power reset to the sensor (for
example a change of batteries), the base station has to synchronize to
the sensor again otherwise no weather data will be received. To do
this, simply press and hold the PLUS(+) key for 2 seconds and a short
beep will sound to synchronize the base station to the sensor. When
the units are synchronized, the data will be received again and the base
station will return to normal operation mode.
Do not reset the power of the base station otherwise all 175 sets of
recorded weather history data for transferring to the PC will be lost (for
full details of PC use, please see PC user manual in the enclosed
Heavy Weather CD-ROM).
Rain Cover
Wall Bracket
Main Unit
