63
10. Relative air pressure setting from 920.0 hPa – 1080.0 hPa (de-
fault 1013.0 hPa)
11. Weather forecast sensitivity setting 2 hPa – 4 hPa (default 4
hPa)
12. Storm warning sensitivity setting 3 hPa - 9 hPa (default 5 hPa)
13. Acoustic storm alarm On/OFF (default ON)
To change any of the above values, once your are in the setting mode,
use the PLUS(+) or MINUS(-) keys to select the values followed by the
SET key to enter the next setting. Continue to press the SET key to
toggle through the setting mode until the LCD returns to the normal
display mode or press the MIN/MAX key at any time to exit.
Note!
Keeping the PLUS(+) or MINUS(-) key depressed when setting certain
units in the manual setting mode will increase/decrease digits in greater
steps.
Manual time setting
The base station will continue to scan for the radio controlled time signal
from 2am-6 am each day (winter time) or from 3am-6am (summer time)
despite it being manually set. During reception attempts the DCF tower
icon will flash.
•
If reception has been unsuccessful, then the DCF77 tower icon
will not appear but reception will still be attempted the following
hour within the time frame
•
If reception has been successful, the received time and date
will overwrite the manually set time and date and no further re-
ception is attempted until the following day
14.
MIN/MAX Programming Modes
MIN/MAX display Mode
The MIN/MAX Mode provides the user with information about the
MIN/MAX values of all weather data together with the time and date at
which these values were recorded.
Entering each MIN/MAX mode
In the normal display mode for e.g. the indoor temperature and humid-
ity, press MIN/MAX key to toggle the display between the maximum,
