57
However if you wish to make a full reset of the base station and return
to the original factory settings, simultaneously press and hold the
PRESSURE and WIND keys for about 5 seconds. The base station will
beep once and the entire LCD will light up for 5 seconds and go back to
the original factory settings. This process with clear all previous user
defined values and all weather history recordings.
Factory default settings:
The following table shows the factory default values of the weather
station:
Matter:
Default Setting:
Time
0:00
Date
01.01.2001
Time zone
0
Alarm time
0:00
Relative air pressure
1013.0 hPa
Weather-picture threshold
3 hPa
LCD contrast level
5 (1-8 levels)
Rainfall per impulse
0.518mm
Storm alarm
5 hPa
Relative air pressure
alarm
960.0 hPa
(low)
1040.0 hPa
(high)
Indoor temperature alarm
10.0ºC (low)
30.0ºC (high)
Outdoor temperature
alarm
0.0ºC (low)
40.0ºC (high)
Indoor humidity alarm
35%RH (low)
65%RH (high)
Outdoor humidity alarm
45%RH (low)
70%RH (high)
Wind chill alarm
10.0ºC (low)
30.0ºC (high)
Dew point alarm
0.0ºC (low)
30.0ºC (high)
Rainfall 24h alarm
50.0mm
Rainfall 1h alarm
1.0mm
Wind Speed
1km/h (low)
100km/h (high)
Wind direction alarm
None set
Note:
All alarm default values are deactivated at the start up and any alarm
must be activated by the user otherwise it will not sound.
