Description
4-1
4 – HP-TS software
4.1 HP-TS
Applications
HP-TS software includes different applications to be used with HP family
analyzers. Shortcuts are shown, selecting “all programs” from the windows
XP “start” button or, using Windows Vista, 7, 8.1 or 10, by clicking
Windows
(
)
and
Programs:
Fig.4-1
HP01-TS icons
The HP01-TS section includes two different applications:
HP01-TS:
this program is used to perform live Time Domain and Spectrum
Analysis measurements when an HP-01 analyzer is connected to PC.
HP01UP:
this is the tool for internal firmware upgrading.
Uninstall HP01-TS:
this is a tool to remove the software package from the
PC.
This document describes applications for HP-01 analyzer only.
The User might have the need of administrator privileges to install the
software in Windows Vista, 7, 8.1 and 10; for further information see
the paragraphs in Chapter 3.
If the battery charger is plugged in to the HP-01 while the software is
running, the analyzer will be disconnected.
Switch the unit on with a short key press of the Power button to set
the probe for communication with HP-TS pc software.
1
Document HP01EN-10707-1.05 - © NARDA 2021
Summary of Contents for HP-01
