39
6.5 REMOVING THE RACKS (TRAY HOLDERS)
Switch-off the oven and disconnect it from the electrical network. Wait for it to cool.
1) Lift the side rack by a few centimetres, freeing it from the 2 latches that secure it at the bottom of the cook-
ing chamber.
2) Tilt it by approximately 30° towards the centre of the oven and then remove it from the 2 pins that secure
it on the top of the cooking chamber.
3) Repeat the operations with the opposite rack
To refit the oven components, carry out in reverse the procedure described above.
1
2
6.6 LAMP REPLACEMENT
Switch off the oven and disconnect it from the electrical network and wait for it to cool.
Spread out a cloth at the bottom of the oven to protect the lamp in case of fall and then handle it carefully.
ATTENTION
Danger of electrical shocks and burns!
1
1) Lift the rack by a few centimetres from the side where
lamp to be replaced is located, freeing it from the 2
latches that secure it at the bottom of the baking
chamber (Picture 1 paragraph 6.5).
2) Tilt it by approximately 30° towards the centre of the
oven and then remove it from the 2 pins that secure
it on the top of the cooking chamber (Picture 1 para-
graph 6.5).
3) Remove the glass lamp cover by loosening the 4 screws
with a Phillips screwdriver.
4) Unscrew the light bulb and remove it.
5) Refit the glass lamp cover and tighten the 4 screws with
a Phillips screwdriver.
ATTENTION
Do not switch-on the oven without having repositioned the lamp-cover!
14
Summary of Contents for VULCAIN-10
Page 25: ...49 NOTES 24 ...
