background image

Attention 

The Oval-U 100 heater has been 

designed, tested, and evaluated 

by the L. B. White Company as a 

radiant tube heater according to 

the requirements of standard IAS 

U.S. Requirements 8-94. The tube 

heater is designed specifically for 

the intended use of heating poultry 

confinement buildings. 

CHECK 

WITH YOUR LOCAL FIRE 
SAFETY AUTHORITY, YOUR 
LOCAL FUEL GAS SUPPLIER, 
OR THE L.B. WHITE COMPA-
NY IF YOU HAVE QUESTIONS 
REGARDING APPLICATIONS.

www.lbwhite.com

SCAN THIS

with your smartphone or

visit http://goo.gl/yyKxJo to  

view maintenance videos  

for L.B.White heaters.

WORLD PROVIDER - INNOVATIVE HEATING SOLUTIONS

411 Mason Street, Onalaska, WI 54650  •  800-345-7200  •  608-783-5691  •  608-783-6115 (fax)  •  www.lbwhite.com

Congratulations!

You have purchased the finest radiant tube heater available for 
the heating of poultry confinement buildings.

Your new L.B. White radiant heater incorporates the benefits 

 

from the most experienced manufacturer of heating products 
using state-of-the-art technology.

We, at L.B. White, thank you for your confidence in our products 

and welcome any suggestions or comments you may have...call 
us toll free at (800) 345-7200.

Propane Vapor Withdrawal 

or Natural Gas

Oval-U 100

Radiant Tube

UT100

100,000 Btuh

Owner’s Manual and Instructions

View this manual online at www.lbwhite.com

*  Requires an app like QR Droid 

for Android or for iPhone

SEE ASSEMBLY

INSTRUCTIONS

INSIDE

Please refer to important 

elevation information on  

inside cover.

Summary of Contents for Oval-U 100

































































Reviews: