L-Acoustics KIVA, Manual

Page: 4 / 48

KIVA
WST SYSTEM
Rigging Procedures and Accessories
VERSION 1
KIVA_RM_ML_1 w w w . l - a c o u s t i c s . c o m 2 en
7. Additional rigging equipment
L-ACOUSTICS is not responsible for any rigging equipment and accessories that are not
manufactured by L-ACOUSTICS.
It is the user’s responsibility to ensure that the Working Load Limit (WLL) of all additional
hardware rigging accessories is greater than the total weight of the system in use.
8. Suspension points
It is the user’s responsibility to ensure that the Working Load Limit (WLL) of the suspension
points and/or chain hoists is greater than the total weight of the system in use.
9. Local regulations
Some countries require higher Ultimate Strength Safety Factors and specific rigging approvals: it
is the user responsibility to ensure that any overhead suspension of L-ACOUSTICS systems has
been made in accordance with all applicable local regulations.
As a general rule, L-ACOUSTICS recommends the use of safety steel at all times.
10. System load capacity and setup safety limits
The load capacity and setup safety limits when rigging or stacking a sound system should be
strictly followed according to the instructions outlined in this manual.
Always refer to the mechanical data and warning indications provided in SOUNDVISION to
verify that safe system setup safety limits apply.
12. Manual
Keep this manual in a safe place during the lifetime of the product.
This manual forms an integral part of the product.
Reselling of the product is only possible if the user manual is available.
Any changes made to the product have to be documented in writing and passed
on to the buyer in the event of resale.
11. Flying the system
No one should be under a sound system when it is being raised. As the system is being raised
check each individual component to make sure that it is securely fasten to the component
above.
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
IMPORTANT