L-Acoustics KIVA, Manual

Page: 19 / 48

KIVA_RM_ML_1 w w w . l - a c o u s t i c s . c o m 17 en
EN
6.3 Attaching the enclosure KIVA or KILO for use in a distributed application (with KIET)
6.3.1 Rigging
The KIET is secured to the enclosure KIVA or KILO in the following way:
1. Attach the KIET to the enclosure. The
example below describes attaching to the KIVA
enclosure:
a. Bring the KIET to the top of the KIVA
by aligning the front connection fittings
slightly left on the joining fittings on the
enclosure.
b. Secure and lock the KIET by sliding it
right towards the center of the KIVA
enclosure until a ‘’click’’ is heard.
Figure 14: Attaching the KIET to the KIVA
Verify that the automatic locking system at the front is fixed and correctly engaged, before KIET is
attached to the rear angle bar, by moving it laterally. Also check that the front part of the KIET doesn’t
shift when moving it up and down, an that the rear part can rotate freely:
Figure 15: Verification that the KIET is properly secured to the KIVA
!
WARNING
a
b