L-Acoustics KIVA, Manual

Page: 12 / 48

KIVA
WST SYSTEM
Rigging Procedures and Accessories
VERSION 1
KIVA_RM_ML_1 w w w . l - a c o u s t i c s . c o m 10 en
2. Attach the KIBU to the first loudspeaker in
the array. The example below describes
attaching to the KILO :
a. Bring the KIBU to the top of the
KILO by aligning the front connection
fittings slightly left on the joining
fittings on the enclosure.
b. Secure and lock the KIBU by sliding
it right towards the center of the
KILO enclosure enclosure until a
‘‘click’’ is heard.
Figure 6: Attaching the KIBU to the KILO
Verify that the automatic locking system at the front is fixed and correctly engaged, before KIBU is
attached to the rear angle bar, by moving it laterally. Also check that the front part of the KIBU
doesn’t shift when moving it up and down, an that the rear part can rotate freely:
Figure 7: Verification that the KIBU is secured to the KILO
3. Remove the security locking pin from the KIBU located below the serial number label:
Figure 8: Remove safety pin from KIBU
!
WARNING
a
b