L-Acoustics K1, Rigging Procedures

Page: 11 / 72

K1_RM_EN_2-0
w w w . l - a c o u s t i c s . c o m
9 9 9 9
5 5 5 5 K1 RIGGING COMPONENTS K1 RIGGING COMPONENTS K1 RIGGING COMPONENTS K1 RIGGING COMPONENTS
5.1 K1-BUMP flying structure, K1-DELTA plate
The
L-ACOUSTICS
®
K1-BUMP flying structure and K1-DELTA plate have been exclusively designed to fly the
K1 and/or K1-SB enclosures as a variable-curvature, vertical line source array. The K1-DELTA plate is for azimuth
angle setting [9.5].
The
K1-BUMP is composed of the following elements:
•
One main frame .
•
One central bar .
•
Four ½” R-BLP (round-shaped ball-locking pins).
•
Two ¾ ” R-BLP .
•
Two ⅜ ” T-BLP (T-shaped ball-locking pins).
•
Four shackles fitted with 22 mm/0.87 inch-diameter bolts and safety pins, ready for two-point hang and
two-point safety attachment [9.2].
•
One adjustable sling to be used in case of climbing-hoist setup [9.3].
•
One rack stabilizer to mount LA-RAK touring racks onto the K1-BUMP [6.1.2].
The
K1-DELTA is composed of the following elements:
•
One delta plate .
•
Three shackles fitted with 22 mm/0.87 inch-diameter bolts and safety pins.
Figure 3: Equipped K1-BUMP
Delta plate
Adjustable sling
22 mm shackle (x4)
½
” R-BLP (x4)
Main frame
Central bar
Rack stabilizer
¾
” R-BLP (x2)
⅜
” T-BLP (x2)
22 mm shackle (x3)