DANGER
¡
Never make measurement on the circuit in which electrical potential
to ground over AC300V exists.
¡
Do not attempt to make measurement in the presence of flammable
gasses. Otherwise, the use of the instrument may cause sparking,
which can lead to an explosion.
¡
Transformer jaw tips are designed not to short the circuit under test.
¡
If equipment under test has exposed conductive parts, however,
extra precaution should be taken to minimize the possibility of
shorting.
¡
Never attempt to use the instrument if its surface or your hand is
wet.
¡
Do not exceed the maximum allowable input of any measuring
range.
¡
Never open the battery cover and the instrument case when making
measurement.
¡
Verify proper operation on a known source before use or taking
action as a result of the indication of the instrument.
WARNING
¡
Never attempt to make any measurement if any abnormal
conditions are noted, such as broken case and exposed metal
parts.
¡
Do not install substitute parts or make any modification to the
instrument. Return the instrument to Kyoritsu or your distributor for
repair or re-calibration.
¡
Do not try to replace the batteries if the surface of the instrument is
wet.
¡
Make sure to power off the instrument when opening the Battery
cover for battery replacement.
CAUTION
¡
Do not expose the instrument to the direct sun, high temperature
and humidity or dewfall.
¡
Be sure to set the range selector switch to "OFF" position after use.
¡
When the instrument will not be in use for a long period, place it in
storage after removing the batteries.
¡
Use a cloth dipped in water or neutral detergent for cleaning the
instrument. Do not use abrasives or solvents.
― 2 ―
