― 35 ―
<Menu setting 2: [SEt. 2] item>
1) Location information
Set the location no. to identify the measuring and recording
place. Location no. is linked to the location list in PC software
and allows to display the location name, which corresponding
the location no., when displaying data on PC software.
Can recognize the place where the data is recorded.
2) Auto-power off
Turn on/off Auto-power off function.
When Auto-power off function is turned off,
mark is
displayed on the LCD and the function will not operate. Be
sure to power off the instrument after use. Auto-power off
function will not operate while recording.
3) Time
Capable of adjusting the time within 00:00 to 23:59.
Connect the instrument to PC and set clock and date on PC
software.
4) Timer (Reservation of starting time)
Display and set the timer. Capable of setting the timer within
00:00 to 23:59.
Recording will start at the time set with the timer.
Press "START/STOP" button 3sec. or more after setting the
timer to get the instrument to recording mode. Instrument
stands by until the set time. At the set time, recording will start.
5) Scale
The value: measured value times scale value, is displayed on
the LCD. (It will not reflect on the recorded data.)
When measuring one-tenth signal via Multi-tran or something,
measured value can be directly read from the LCD as it is
displayed : Measured value x 10.0 = Indicated value, if setting
the scale value to 10.0.
