2BC/D
1-3-18
1-3-4 Installing the multi/simple finisher (option)
Preparation
1. Attach the paper insertion aid guide plate to
the left cover of the copier and lock down with
the two M4
×
10 tap-tight binding screws.
Figure 1-3-34
Figure 1-3-35
Figure 1-3-36
2. Attach the finisher connecting plate to the
copier left cover and then hold them together
with the two M4
×
12 binding screws.
3. Attach the connecting sponge to the finisher
by aligning the sponge to the upper end “a”
and front end “b” of the paper port of the
finisher.
Left cover
Paper insertion aid guide plate
Finisher connecting plate
Left cover
a
b
a
Connecting sponge
Summary of Contents for Ri 4530 Copystar
