manualshive.com logo in svg

Kyocera Ri 4530 Copystar, Service Manual

Share
Download
Kyocera Ri 4530 Copystar Service Manual Download Page 122

2BC/D

1-4-53

Maintenance

Description

item No.

U252

Setting the destination

Description

Switches the operations and screens of the machine according to the destination.

Purpose

To be executed after replacing the backup RAM on the main PCB or initializing the backup RAM by running
maintenance item U020, in order to return the setting to the value before replacement or initialization.

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select the destination. The selected item is displayed in reverse.

Display

Description

JAPAN METRIC

Metric (Japan) specifications

INCH

Inch (North America) specifications

EUROPE METRIC

Metric (Europe) specifications

ASIA PACIFIC

Metric (Asia Pacific) specifications

2. Press the start key. The setting is set, and the machine automatically returns to the same status as when

the power is turned on.

Completion

To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.

Supplement

The specified initial settings are provided according to the destinations in the maintenance items below. To
change the initial settings in those items, be sure to run maintenance item U021 after changing the destination.
• Initial setting according to the destinations

Maintenance

Title

Japan Inch

Europe Metric,

item No.

Asia Pacific

253

Switching between double and single counts

Single

Double Double

255

Setting auto clear time

120 s

90 s

90 s

U253

Switching between double and single counts

Description

Switches the count system for the total counter and other counters.

Purpose

According to user (copy service provider) request, select if A3/LEDGER or B4/LEGEL paper is to be counted as
one sheet (single count) or two sheets (double count).

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select double or single count. The selected item is displayed in reverse.

Display

Description

SINGLE COUNT

Single count for all size paper

DOUBLE COUNT(A3/LEDGER)

Double count for A3/LEDGER paper only

DOUBLE COUNT(B4/LEGEL)

Double count for B4/LEGEL size or larger

Initial setting: DOUBLE COUNT(A3/LEDGER)

2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.

Completion

To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.

Summary of Contents for Ri 4530 Copystar

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands