2BC/D-1
1-6-19
(6-5) Adjusting the amount of slack in the paper at the registration roller
Make the following adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper is
Z-folded.
Procedure
Figure 1-6-36
End
Start
Enter maintenance mode.
Enter “051” using the numeric keys.
Yes
Yes
No
No
Press the start key.
Press the interrupt key.
Press the start key
to make a test copy.
Decrease the value using the cursor down key.
Setting range (initial setting)
DECK DATA : –30 – +40 (
–10
)
DECK DATA2 : –30 – +40 (
3
)
BYPASS DATA : –30 – +40 (25)
DUPLEX DATA : –30 – +40 (
18
)
Changing the value by 1 moves the amount of slack by 1.0 mm.
The greater the value, the larger the amount of slack;
the smaller the value, the smaller the amount of slack.
The new setting is stored.
Select the item to be adjusted.
• Amount of slack in the paper at the registration roller
DECK DATA : Drawer 1
DECK DATA2 : Drawer 2
BYPASS DATA : Bypass tray
DUPLEX DATA : Duplex copying (second face)
Is the leading
edge of the image missing
or varying randomly (copy
example 1)?
Is the copy
paper Z-folded (copy
example 2)?
Increase the value using the cursor up key.
Press the start key.
Press the stop/clear key to
exit maintenance mode.
Original
Copy
example 1
Copy
example 2
Summary of Contents for Ri 4530 Copystar
