59
Safety Precautions
How to close the card slot cover
① After stowing the cover, press on the cover with
the flat part of your finger. ② Rub your finger over
the cover in the direction of arrow to ensure that the
cover is not partially open.
①
②
● If any liquid other than plain water gets on the
product
• If anything other than water (seawater, washing
detergent, alcohol, etc.) gets on the product,
immediately rinse with water.
• Wash with slightly weak running water (less than
6 liters/minute) with tap water (5℃ to 35℃ ) at
a position about 10 cm away from the faucet or
shower.
• If the product gets soiled, wash by hand without
using a brush, etc., holding the product so that the
card slot cover does not open.
● After the product gets wet
• After becoming wet, drain water and wipe the product
with a dry, clean cloth.
• In cold regions, any water on the product may freeze.
Using the product with frozen water may cause
malfunction. Do not leave water drop on the product.
● Rubber seal
• The rubber seal around the card slot cover is
important in maintaining water resistance. Do not
scratch or remove it.
• Be careful not to pinch the rubber seals when closing
the card slot cover. Trying to close the cover with a
seal pinched can scratch the seal and affect water
resistance. Any minute particles becoming lodged
between contact surfaces (a single hair, etc.), no
matter how small, can cause seepage.
