2RV/2RW/2RX/2RY/3RA-3
7-79
C2600: PF feed motor error (PF1)
Target: Paper feeder 1
Ready signal does not turn on even passing 2s after the PF feed motor starts up.
C2610: PF feed motor error (PF2)
Target: Paper feeder 2
Ready signal does not turn on even passing 2s after the PF feed motor starts up.
Step
Check description
Assumed cause
Measures
Reference
1
Checking the connection
The connector is not prop-
erly connected or the wire
is faulty.
Clean the terminal of the fol-
lowing wire connectors and
reconnect the connectors. If
there is no continuity, replace
the wire.
• PF feed motor - PF main
PWB (YC4)
• PF main PWB (YC5) -
Drawer connector
• Drawer connector - Main/
engine PWB (YC17)
2
Checking the driving parts
The PF feed motor drive
parts do not operate prop-
erly.
If the coupling and gear in the
PF feed motor drive section
do not rotate smoothly, clean
the gear and apply grease to
it. If the coupling or gear is
broken, replace it.
3
Replacing the PF feed
motor
The PF feed motor is
faulty.
Replace the PF feed motor
4
Replacing the main/engine
PWB
The main/engine PWB is
faulty.
Replace the main/engine
PWB.
Step
Check description
Assumed cause
Measures
Reference
1
Checking the connection
The connector is not prop-
erly connected or the wire
is faulty.
Clean the terminal of the fol-
lowing wire connectors and
reconnect the connectors. If
there is no continuity, replace
the wire.
• PF feed motor - PF main
PWB (YC4)(PF2)
• PF main PWB (YC5)(PF2) -
Drawer connector
• Drawer connector - PF
main PWB (YC6)(PF1)
• PF main PWB (YC5)(PF1) -
Drawer connector
• Drawer connector - Main/
engine PWB (YC17)
