2RV/2RW/2RX/2RY/3RA-3
7-24
7-2 Feeding/Conveying Failures
(1) Prior standard check items
Content of Feeding/Conveying Failures
(1-1) Paper jam due to the cover-open detection
No.
Contents
(1-1)
Paper jam due to the cover-open detection
(1-2)
Paper jam due to the wave or curl in the fuser section of the damp paper
(1-3)
Paper jam due to dog-ear, skew, crease. fusing failure, curl, etc.
(1-4)
Paper jam due to the guide factor
(1-5)
Paper jam due to paper loading failure at the paper source
(1-6)
Paper jam due to the inferior paper
(1-7)
Paper jam caused by conveying rollers and pulleys
(1-8)
Paper jam due to the sensor
(1-9)
Paper jam due to setting failure or detection failure
(1-10)
Paper jam due to the static electricity
(1-11)
Paper jam due to paper storage environment (high humidity)
Step
Check description
Assumed cause
Measures
Reference
1
Opening / closing the front
cover
The front cover is not
engaged.
Open/close the front cover.
2
Re-loading / replacing
paper
The paper fanning is not
enough or the cutting edge
of loaded paper is dam-
aged.
Fan the paper well and re-
load paper after switching top
and bottom ends. If the paper
is folded, correct or replace it.
3
Re-loading paper
The paper is wavy.
Correct or replace paper. If
difficult to replace, re-load
paper by switching top and
bottom ends or turning it over.
4
Checking the paper
Paper out of specification
is used or foreign objects
adhere to paper.
Ask a user to use the speci-
fied paper type. Or, remove
the paper with foreign
objects.
5
Re-loading paper
The paper is not properly
loaded.
Reload paper in the cassette.