Kyocera KM-2550, Service Manual

Page: 62 / 282

2FT
1-3-40
22. Fit in the right-side two pawls of the opera-
tion section sheet cover that has been
removed by Procedure 20 and then attach
the operation section sheet cover to its origi-
nal position.
Figure 1-3-79
Attach the one-touch securing sheet.
23. Remove the release paper from the one-touch securing sheet.
24. Adhere the one-touch securing sheet on the base frame of the
one-touch key so that it sticks fast to the surface while matching
the top surface to the top left corner and firmly pressing the whole
area down as shown in the illustration.
25. Push all the one-touch keys to check that the onetouch securing
sheet does not block any one-touch key.
Figure 1-3-80
Attach the fax label (220-240 V specifications only).
26. Adhere the fax labels (1) to (4) of the fax
label sheet of the corresponding language
at the positions for the cover plate shown in
the illustration.
Figure 1-3-81
Operation section sheet cover
Pawl
Pawl
One-touch securing sheet
Fax label sheet
Cover plate