Kyocera KM-2550, Service Manual

Page: 127 / 282

2FT
1-4-58
Manual exposure adjustment (text mode)
Adjusts the median exposure value when the text
mode is selected for the image quality.
1. Select [Txt Ori Density] and then press the enter
key.
2. Adjust the exposure and then press the enter key.
Setting range: 1 to 7
Manual exposure adjustment (photo mode)
Adjusts the median exposure value when the photo
mode is selected for the image quality.
1. Select [Photo Ori Dnsity] and then press the enter
key.
2. Adjust the exposure and then press the enter key.
Setting range: 1 to 7
Sort mode ON/OFF
Determines whether or not the Sort mode will be the
default setting in the initial mode.
1. Select [Sort] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.
Offset copying
Determines whether or not the offset copy will be the
default setting in the initial mode.
1. Select [Offset] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.
Auto Rotation mode ON/OFF
Determines whether or not the Auto Rotation mode will
be the default setting in the initial mode.
1. Select [Auto Rotation] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.
Margin width
Determines the default value of the location and width
of the margins in the margin mode.
1. Select [Margin Width] and then press the enter key.
2. Sets the margin widths and then press the enter
key.
Setting range: 1/8" to 3/4" in 1/8" increments (inch
specifications) 1 to 18 mm in 1mm increments
(metric specifications)
Erased border width
Determines the default value for the width of the border
to be erased in the two border erase modes.
1. Select [BorderEraseWidth] and then press the
enter key.
2. Sets the widths and then press the enter key.
Setting range: 1/8" to 3/4" in 1/8" increments (inch
specifications) 1 to 18 mm in 1mm increments
(metric specifications)
Copy limit
Sets the limit for the number of copies (or copy sets)
that can be made at a time.
1. Select [Copy Limit] and then press the enter key.
2. Sets the copy limit and then press the enter key.
Setting range: 1 to 999
Black-line correction
Reduces black lines that may be caused when the DP
is used.
1. Select [Corr. Black line] and then press the enter
key.
2. Select [None], [Weak] or [Strong] and then press
the enter key.