Kyocera FS 1700 - B/W Laser Printer, User Manual

Page: 6 / 116

Laser notice
This printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter
for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to
the requirements of IEC 825.
Caution
CDRH regulations
The Center of Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administra-
tion implemented regulations for laser products on August 2, 1976. These regulations apply
to laser products manufactured after August 1, 1976. Compliance is mandatory for products
marketed in the United States. A label indicating compliance with the CDRH regulations must
be attached to laser products marketed in the United States.
Ozone concentration
The printers generate ozone gas (O
3
) which may concentrate in the place of installation and
cause an unpleasant smell. To minimize concentration of ozone gas to less than 0.1 ppm, we
recommend you not to install the printer in a confined area where ventilation is blocked.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
(European/Asian
countries)
(U.S.A./Canada)
Introduction
v