Optimized stripes
The current KIR setting is optimal.
Dark vertical stripes
Set the KIR mode to
Light
or
Medium
. Try printing the test
pattern again. If you still get dark vertical stripes, adjust the print
density control to a lighter setting. (See the last page in this man-
ual.)
White vertical stripes
Set the KIR mode to
Medium
or
Dark
. Try printing the test pat-
tern again. If you still get white vertical stripes, adjust the print density
control to a darker setting. (See the last page in this manual.)
2.6. Ecoprint mode
The Ecoprint enables you to reduce the amount of
toner consumed on the page so as to save your
printing costs. You can set to Ecoprint mode on,
as follows. (The factory-setting is off . )
The Ecoprint mode setting is On when the printing
image becomes lighter, yet very readable.
*
The Ecoprint setting has no effect on
the print speed.
Ecoprint setting is
Off
(default).
Ecoprint setting is
On
.
2.6. Ecoprint mode
2-16
Summary of Contents for FS 1700 - B/W Laser Printer
