Kyocera ECOSYS M4125idn Operation Manual Download Page 54

Page: 54 / 212

3-2

Fax transmission > Basic transmission procedure

Basic transmission procedure

The basic procedure for using the fax system is explained below.

Select [FAX] on the Home screen.

The base screen for fax appears.

Place the originals.

For placing originals, refer to the following:

Machine’s Operation Guide

Select the transmission method.

There are two transmission methods: memory transmission and direct transmission.

Memory transmission: After originals are scanned into memory, the communication starts. Memory transmission
is selected by default.

Direct transmission: The destination is dialed and communication starts before the original is scanned.

Select [Direct] to change the transmission method to direct transmission. The key will be highlighted on the touch
panel. If the [Direct] is selected in the highlighted state, the transmission method will change to memory
transmission.

For operation of direct transmission, refer to the following:

[FAX Direct Transmission] (5-7)

Select the Destination.

Specify the transmission destination.

Methods For Entering the Destination (3-6)

Selecting the functions.

Select the tab, and set transmitting functions that can be used.

Fax transmission functions (5-3)

Summary of Contents for ECOSYS M4125idn





















































































































































































































Search results

Summary of Contents for ECOSYS M4125idn

Reviews:

Related manuals for ECOSYS M4125idn

Brands by name

Popular brands

Kyocera ECOSYS M4125idn, Operation Manual

Search results

Summary of Contents for ECOSYS M4125idn

Reviews:

Related manuals for ECOSYS M4125idn

Brands by name

Popular brands