7-4
Job Control > Printing Administrative Reports (Result Report Setting)
Printing Administrative Reports (Result Report
Setting)
You can print various administrative reports to check the results of fax transmission or the status of the functional setup.
Printing Send Result Reports
Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also print the
transmitted image in the send result report.
1
Display the screen.
[System Menu/Counter] key > [Report] > [Result Report Setting] > [Send Result Report] > [Fax]
2
Configure the settings.
1
Select [Off] (not to print), [On] (to print), [Error Only], or [Specify Each Job].
2
If you selected [On], [Error Only] or [Specify Each Job], specify whether the transmitted image is to be attached
by selecting [Off] (do not print transmitted image), [Partial Image] (print part of the transmitted image at full
size), or [Full Image] (print the entire transmitted image at reduced size).
Report for Job Canceled before Sending
Print a send result report when the job is canceled before being sent.
1
Display the screen.
[System Menu/Counter] key > [Report] > [Result Report Setting] > [Send Result Report] > [Canceled before
Sending]
2
Configure the settings.
Select [Off] or [On].
NOTE
When [Specify Each Job] is selected, it is possible to set a send result report when transmitting.
Activity Report (Outgoing FAX Report and Incoming FAX Report) (7-7)
NOTE
This is not displayed if [E-mail/Folder] and [Fax] are both set to [Off] in [Send Result Report].
Send Result Report
Completed
Completed
Send Result Report
With transmitted image
Without transmitted image
Summary of Contents for ECOSYS M4125idn
Page 212: ...2017 8 3S4KDEN000 ...
