10-7
Troubleshooting > Troubleshooting
Troubleshooting
When a problem occurs, first check the following. If the problem persists, contact your dealer or service representative.
Symptom
Checkpoint
Corrective Action
Reference
Page
Cannot send document.
Is the modular cord connected
correctly?
Connect the modular cord correctly.
―
Is
Send error
displayed?
Remedy the cause of error and send
again.
10-5
Is TX (transmission) restriction
activated?
Cancel the TX restriction.
9-10
Cannot perform broadcast
transmission.
Is free space available in the
memory?
Send after the memory has free space, or
create free space in the memory.
―
Cannot perform encrypted
communication.
Are the registrations correct both
at sender and recipient?
Double-check the registrations both at
sender and recipient.
6-36
Cannot use the remote
switching function.
Is a pulse line used?
Some phones may transmit tone signals
using buttons. Refer to the operation
manual of your phone set.
―
Is the remote switching number
correct?
Check the registration. (Default: 55)
7-10
No print output after reception.
Is memory forwarding activated?
Check the forwarding destination.
6-2
Cannot receive document.
Is the modular cord connected
correctly?
Connect the modular cord correctly.
―
Is
Communication error
displayed?
Remedy the cause of error and ask the
sender to retry.
10-5
Is RX (reception) restriction
activated?
Cancel the RX restriction.
9-10
Cannot perform memory
reception.
Is free space available in the
memory?
Receive after the memory has free space,
or create free space in the memory.
―
Cannot perform sub address
transmission.
Is the recipient fax machine
equipped with a sub address
transmission feature?
Sub address transmission cannot be
performed unless the recipient fax
machine has a similar sub address
transmission feature.
―
Is the entered sub address or
sub address password identical
to the sub address or sub
address password registered in
the recipient fax machine?
If your entry is correct, check with the
recipient. This machine does not use a
sub address password for reception.
6-23
Is free space available in the
memory of the recipient fax
machine?
Check with the recipient.
―
Cannot perform memory
forwarding.
Is memory forwarding set to
[On]
?
Check the memory forwarding setting.
6-2
Summary of Contents for ECOSYS FS-3640MFP
Page 1: ...FAX OPERATION GUIDE FS C2626MFP FS 3640MFP ...
Page 210: ......
Page 211: ...First edition 2011 4 2MDKMEN000 ...