Kyocera ECOSYS FS-3040MFP+ Operation Manual Download Page 406

Page: 406 / 454

11-26

Management

Applying Limit of Restriction

This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.

Use the procedure below to apply the restriction limit.

Press the

System Menu/Counter

key on the main unit

operation panel.

Press the

key to select [User/Job Account].

A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the

Right Select

key).

NOTE:

The User/Job Account menu appears.Refer to

Character Entry Method on Appendix-5

for details on

entering characters.

The User/Job Account menu appears.

Press the

key to select [Job Account. Set.].

Press the

key. The Job Account. Set. menu appears.

Item

Description

Immediately *

The next job will be prohibited in sending or in storing in the box.

Job stops when the counter reaches its limit.

Subsequently

Printing/scanning of the job continues but the
subsequent job will be rejected.

Alert Only

Job continues while displaying an alert message.

Sys. Menu/Count.:

*********************

User Property

Common Settings

[ Exit

]

User/Job Account

*******************

[ Login

]

User/Job Account:

User Login Set.

*********************

Unknown ID Job

[ Exit

]

Job Account.Set.

Job Account.Set.:

Each Job Account

Account. List

*********************

[ Exit

]

Default Setting

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands