Kyocera ECOSYS FS-3040MFP+ Operation Manual Download Page 339

Page: 339 / 454

8-141

Default Setting (System Menu)

Press the

key. The Network Setting menu appears.

Press the

key to select [Secure Protocol].

Press the

key. Secure Protocol appears.

Press the

key to select [SSL].

Press the

key. SSL appears.

Press the

key to select [On] or [Off].

Press the

key.

Completed.

is displayed and the

screen returns to the Secure Protocol menu.

IPP Security

Specify the protocol to be used for IPP. The default setting is

IPPoverSSL only

Use the procedure below to make the setting.

In the Sys. Menu/Count. menu, press the

key to

select [System], and press the

key.

A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the

Right Select

key).

Network Setting:

WSD-PRINT

IPSec

*********************

[ Exit

]

Secure Protocol

Secure Protocol:

*********************

IPP Security

HTTP Security

[ Exit

]

SSL

SSL:

*********************

*Off

Sys. Menu/Count.:

Report

Counter

*********************

[ Exit

]

System

*******************

[ Login

]

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands