Kyocera ECOSYS FS-3040MFP+ Operation Manual Download Page 307

Page: 307 / 454

8-109

Default Setting (System Menu)

Enter the path name.

Press the

key. Login User Name appears.

Enter the login user name.

Press the

key. Login Password appears.

Enter the login password.

Press the OK key. A confirmation screen appears.

NOTE:

If the screen for confirming the entry of a new

destination (

page 8-88

) is set to [On], screens to confirm the

entered host name and path name appear. Enter the same
host name and path name again and press the

key on

their respective screens.

Press [Yes] (the

Left Select

key). This makes a

connection with the entered destination.

If the connection is successful,

Connected.

is displayed

on the screen. Press [OK] (the

Right Select

key).

Completed.

is displayed and the folder (SMB/FTP)

address is registered.

If the connection failed,

Cannot connect.

is displayed.

Press [OK] (the

Right Select

key). The screen shown in

step 2 reappears. Check and re-enter the destination.

Maury

ABC

[ Text

]

OOOOOOOOOOO

ABC

[ Text

]

Check the connection.
Are you sure?

[

Yes

] [

]

Dest. Confirm.:

Morgan@###########

0667640000*********

0667741234

[ Exit

]

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands