Kyocera ECOSYS FS-1370DN Operation Manual Download Page 85

Page: 85 / 110

Using the Operation Panel

2-67

Adjust/Maintenance (Adjust/Maintenance
selection/setting)

Adjust/Maintenance is used to adjust the print quality and to carry out
printer maintenance.

The options available in Adjust/Maintenance are as follows:

•

Restart Printer

•

Service (for maintenance)

Press

[MENU]

Press

repeatedly until

Adjust/Maintenance >

appears.

Restart Printer

The procedure described below resets the printer’s temporary
conditions, such as the current page orientation, font, etc., set by
commands to their default values. Downloaded fonts and macros are
deleted from the printer’s memory.

Press

while

Adjust/Maintenance >

is displayed.

Press

repeatedly until

>Restart Printer

appears.

Press

[OK]

. A question mark (

) appears.

Press

[OK]

again.

Self test

appears while the printer is resetting

itself, followed by

Ready

IMPORTANT

Service

is primarily a menu used by service

representative for maintenance work. There is no need for customers
to use this menu.

Adjust/Maintenance >

>Restart Printer ?

Summary of Contents for ECOSYS FS-1370DN















































































































Search results

Summary of Contents for ECOSYS FS-1370DN

Reviews:

Related manuals for ECOSYS FS-1370DN

Brands by name

Popular brands

Kyocera ECOSYS FS-1370DN, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1370DN

Reviews:

Related manuals for ECOSYS FS-1370DN

Brands by name

Popular brands