Kyocera ECOSYS FS-1370DN, Operation Manual

Page: 64 / 110

2-46 Using the Operation Panel
Buzzer (Alarm (Buzzer) setting)
This function uses tones to notify the user of printer operations and the
printer status. This setting is useful, for example, when the printer is
located some distance from the user.
The options available in Buzzer are as follows:
• Key Confirm. (Key confirmation tone setting)
• Job End (Job completed tone setting)
• Ready (Preparation completed tone setting)
• Error (Error tone setting)
1
Press Z while
Device Common >
is displayed.
2
Press U or V repeatedly until
>Buzzer >
appears.
Key Confirm. (Key confirmation tone setting)
When
On
is selected in this setting, a tone sounds each time a key is
used. The default setting is
On
.
1
Press Z while
>Buzzer >
is displayed.
2
Press U or V repeatedly until
>>Key Confirm.
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using U or V .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Job End (Job completed tone setting)
When
On
is selected in this setting, a tone sounds when printing ends.
The default setting is
Off
.
1
Press Z while
>Buzzer >
is displayed.
2
Press U or V repeatedly until
>>Job End
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using U or V .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
>Buzzer >
>>Key Confirmation
? On
>>Job End
? Off