Kyocera 6026, Service Manual

Page: 41 / 375

2PX/2PY
1-3-3
Image
processing U402 Adjust Print Margin 4.0/4.0/4.0/4.0
U403 Adjust Scanning Margin(Table) 2.0/2.0/2.0/2.0
U404 Adjust Scanning Margin(DP) 3.0/2.5/3.0/4.0
U410 Adjusting the halftone automatically -
U411 Auto Adj Scn -
U425 Set Target -
Fax U600 Initializing all data -
U601 Initializing permanent data -
U603 Setting user data 1 DTMF
U604 Setting user data 2 2 (120 V)
1 (220-240 V)
U605 Clearing data -
U610 Setting system 1
Setting the number of lines to be ignored when receiving a
fax at 100% magnification
Setting the number of lines to be ignored when receiving a
fax in the auto reduction mode
Setting the number of lines to be ignored when receiving a
fax (A4R/LetterR) in the auto reduction mode
3
0
0
U611 Setting system 2
Setting the number of adjustment lines for automatic reduc-
tion
Setting the number of adjustment lines for automatic reduc-
tion when A4 paper is set
Setting the number of adjustment lines for automatic reduc-
tion when letter size paper is set
7
22
26
U612 Setting system 3
Selecting if auto reduction in the auxiliary direction is to be
performed
Setting the automatic printing of the protocol list
Setting how trailing edge margins are detected
On
Off
On
U620 Setting the remote switching mode One
U625 Setting the transmission system 1
Setting the auto redialing interval
Setting the number of times of auto redialing
3 (120 V)
2 (220-240 V)
2 (120 V)
3 (220-240 V)
U630 Setting communication control 1
Setting the communication starting speed
Setting the reception speed
Setting the waiting period to prevent echo problems at the
sender
Setting the waiting period to prevent echo problems at the
receiver
14400bps/V17
14400bps
300
75
Section
Item
No.
Content of maintenance item
Initial
setting