Kyocera 1102H03NL0, Service Manual

Page: 139 / 392

2H0/2HZ
1-4-7
Optional
finisher 81
Paper entry sensor
nonarrival jam (Document finisher)
The paper entry sensor (PES) is not turned on even if a
specified time has elapsed after the machine eject signal
was received. 2627 ms
(Built-in finisher)
The paper conveying switch (PCSW) is not turned on
even if a specified time has elapsed after the machine
eject signal was received. 2000 ms
(Built-in finisher)
The paper conveying switch (PCSW) does not turn off
within specified time of its turning on when paper is con-
veyed to the process table from the paper conveying unit. 1429 ms + Paper
length
82
Jam in stapler (Document finisher)
The staple home position sensor (STSPS) is not turned
on within the specified time when driving the staple motor
(STM). 1000 ms
(Built-in finisher)
The staple home position sensor (STHPS) is not turned
on within the specified time when driving the staple motor
(STM). 600 ms
83
Exit sensor stay jam (Document finisher)
In the straight mode, the exit sensor (EXS) is not turned
off within specified time of its turning on. 1680 ms
(Document finisher)
In the offset or staple mode, the exit sensor (EXS) is not
turned off within specified time of its turning on. 5375 ms
(Built-in finisher)
The paper conveying switch (PCSW) does not turn off
within specified time of its turning on when paper is
ejected to the finisher tray from the process table. 1429 ms + Paper
length
91
Finisher cover open
(document finisher
only) The finisher cover becomes open during paper is run-
ning.
Paper is remaining in paths at power on. -
92
Exit sensor non-arrival
jam (document finisher
only) In the straight mode, the exit sensor (EXS) is not turned
on even if a specified time has elapsed after the paper
entry sensor (PES) was turned on. 1770 ms
93
Reverse sensor jam
(document finisher
only) The reverse sensor (REVS) does not turn on within spec-
ified time of paper entry sensor (PES) turning on. 1125 ms
The reverse sensor (REVS) is not turned on within speci-
fied time. Depends on paper
size
The reverse sensor (REVS) does not turn off within spec-
ified time of paper entry sensor (PES) turning off. 654 ms
The reverse sensor (REVS) is not turned off within speci-
fied time its turning on. Depends on paper
size
Section Description Conditions Specified time