Kyocera Mita KM-P4845w, Operation Manual

Page: 43 / 66

CHAPTER 5 MANAGEMENT AND SETTING
5-9
7. Fusing temp.
1 Press the N or M key to select a media type.
Inch specifications
Fusing temp.:
1.Plain
Metric specifications
Fusing temp.:
1.Plain
2 Press the Enter key.
3 The selected item will flash. Press the
N
or
M
key to select
the fixing temperature for each media type.
> If “Plain” has been selected, select from 145
°
C, 155
°
C,
and 165
°
C.
Inch specifications
Plain:
155
°
C*
Metric specifications
Plain:
155
°
C*
> If “Vellum” has been selected, select from 165
°
C, 175
°
C,
and 185
°
C.
> If “Film” has been selected, select from 150
°
C, 160
°
C,
and 170
°
C.
> If “Custom” has been selected, the temperature that has
been set for the custom media type will be displayed.
4 Press the Enter key. The display will show “set ( value ) *” and
return to the step 1 screen.
5 Press the
N
or
M
key to select “End” [“back”].
6 Press the Enter key. The printer will return to the machine
settings screen.
8. Custom paper
1 The selected item will flash. Press the N or M key to select
a media type.
Inch specifications
Custom paper:
Vellum*
Metric specifications
Custom paper:
Vellum*
2 Press the Enter key. The display will show “set (
value
) *” and
return to machine settings screen.
9. Standard size
1 Press the N or M key to select the type of standard size.
For an inch specification printer, select “Architecture” or
“Engineer”. For a metric specification printer, select “A sizes”
or “B sizes”.
Inch specifications
Standard size:
Architecture*
Metric specifications
Standard size:
A sizes*
2 Press the Enter key. The display will show “set (
value
) *” and
return to machine settings screen.