Kyocera Mita KM-P4845w, Operation Manual

Page: 27 / 66

CHAPTER 3 GETTING READY FOR PRINTING
3-9
(3) Dew prevention heater
If the humidity is high (more than 70 %RH) or drastic temperature
change occurs, turn on ( l ) the dew prevention heater switch when
using the machine. Even if the main switch is off (
), the dew
prevention heater switch can be on ( l ).
IMPORTANT
When using vellum or film, be sure to turn off ( O ) the dew prevention
heater switch. If not, paper may be wrinkled or curled.
(4) How to Use the Paper Tray Support Plate
Set the paper tray support plate based on the paper to be used for
printing.
1 Incline the paper tray support plate and slide it to the size
indication on the size label of the paper tray.
2 After setting the paper tray support plate to the desired size,
return it to a horizontal state.
3 Follow the same procedure to set the other paper tray
support plate to the same height.
Depending on the paper to be used and the environment, the
support plate may not be contained at the position of the size
label. In this case, adjust the position of the paper tray
support plate upward or downward.