Kyocera Mita KM-P4845w, Operation Manual

Page: 13 / 66

2-1
CHAPTER 2 PRIOR TO SET-UP
1. Names of Parts
1 2 3 6 6
4
5
7
8 8 9
3
4
0
!
@
(1) Main Body
1
Operation panel
Use to make settings in the printer.
2
Ejection cover
Open in case of a paper jam.
3
Ejection release lever
Operate this lever in case of a paper jam.
4
Printer body release lever
Operate this lever in case of a paper jam.
5
Bypass table
When printing documents and using the manual paper feed
setting, set paper onto on this table.
6
Bypass guide
7
Front cover
Open to set paper roll or in case of a paper jam.
8
Paper tray
Printed sheets will be stored here.
9
Paper tray support plate
Set in accordance with paper size.
0
Main switch
Turn this switch ON ( | ) in order to use the printer. Conversely,
make sure this switch is OFF (
) before connecting network
cables.
IMPORTANT
• Once you turn the main switch ON ( | ) wait for at least 20 seconds
or so before attempting to turn it OFF (
) again. Failure to doing
so may damage the printer.
• Make sure that you wait at least for 5 seconds after turned the
main switch OFF (
) to remove the power plug from the outlet.
!
Total counter
This indicates the paper output length.
@
Key counter insert slot
When a key counter (option) is installed, insert the key counter
here.